Beretta 92fs Italian - The Beretta 92 (also Beretta 96 and Beretta 98) is a series of semi-automatic pistols designed and manufactured by Beretta of Italy. The Beretta 92 was designed in 1975 and production began in 1976. Many versions of various calibers continued to be used until recently.
The US Army replaced the .45 ACP M1911A1 pistol with the Beretta 92FS designated "M9" in 1985.
Beretta 92fs Italian
The Beretta 92 pistol evolved from earlier Beretta models, particularly the M1923 and M1951. The slide design is derived from the M1923, while the alloy frame and breechblock barrel, originally from the Walther P38, were first used in the M1951. A grip angle and slide-integrated front sight were also common to earlier Beretta pistols. Perhaps the two most significant advanced design features of the Model 92 were those that first appeared on its immediate predecessor, the .380 caliber Model 84 in 1974. These improvements included a direct-feed magazine; that is, there was no feed ramp between the magazine and the chamber (a Beretta innovation in pistols). In addition, the magazine was designed with a "double stack", originally introduced in 1935 on the Browning Hi-Power.
Test: Beretta 92x Performance
Carlo Beretta, Giuseppe Mazzetti and Vittorio Valle, all experienced firearms designers, contributed to the final design in 1975.
Production began in May 1976 and began in February 1983. There were approximately 7,000 units of the first "stepped slider" and 45,000 of the second "flat slider".
To meet the requirements of some regulatory agencies, Beretta modified the Beretta 92 by adding a slide-mounted combination safety and cocking lever to replace the frame-mounted manual thumb safety. This led to the 92S, which was adopted by many Italian police forces and military units. The magazine release button is at the bottom of the handle, as is common in Europe. This model was produced between 1978 and 1982.
The 92SB, originally designated the 92S-1, was designed specifically for the USAF trials (which it won), and the officially adopted model name was the 92SB. Additional features include a firing pin block (hence the "B" added to the name), ambidextrous safety levers, 3-dot sights, and a magazine release lock relocated from the bottom of the grip to the bottom of the trigger guard. . The later relocation of the magazine release button means that the earlier models (92 and 92S) cannot necessarily use the newer magazines unless they have notches in both areas.
File:beretta 92 Compact L Pdrm.jpg
A compact version with a shorter barrel and slide and a magazine capacity of 13 rounds, known as the Kompact 92SB, was produced between 1981 and 1991.
A gold-plated, diamond-encrusted 9mm Parabellum pistol with a matching suppressor, seized from the safe house of Joaquín "El Chapo" Guzman. (Source: Museum of Drug Administration and Cter for visitors)
In 1984, Beretta introduced a slightly modified version of the 92SB to create the 92SB-F (the "F" was added to try to get the model into US federal testing) by making the following changes:
The French Army adopted a modified version of the 92F with an elevating lever only as the PAMAS G1. These guns have tellurium in the slide which makes the steel brittle and therefore only have a life of about 6000 rounds.
Pistol, Italian, Semi Automatic, Made Beretta, Model 92fs, Caliber 9x19, Production No. E73454z, See No. Se0163788. Licence Weapons
The 92FS has a large firing pin that fits into a groove on the underside of the slide. The main purpose is to prevent the slide from flying back off the frame if it cracks. This was in response to reports of defective slides during US military testing.
The 92FS also came as the 92FS Cturion model, which featured a shorter barrel and a Compact 92 slide on a full-size 92FS frame.
The slide design of the Beretta 92 ensures smooth feed and ejection of bullets and allows for easy clearance of obstacles. The hard chrome bore of the pipe reduces wear and protects the pipe from corrosion. The design of the falling breechblock provides good accuracy and action with suppressors due to the linear movement of the barrel. This differs from the complex barrel travel designed by Browning. The magazine release button is reversible with simple field tools. Reversing the magazine release makes it much easier to work with a left-handed person.
Reducing the weight and cost of guns and increasing corrosion resistance through the use of polymers has become increasingly popular. Around 2000, Beretta started replacing some parts with polymer and polymer coated metal. Polymer parts include the recoil spring guide rod (also now crimped), magazine floor plate, magazine follower, and cover loop/mains cord. Polymer coated metal parts include the left safety lever, trigger and magazine release button.
Beretta 92fs [review]: True Wonder 9
In order to remain compliant with the introduction of laws in some locations that limit magazines that hold more than 10 rounds, Beretta is now producing magazines that hold less than the factory standard 15 rounds. These magazines have a heavier roll (deeper recesses in the side) to reduce the available space while still maintaining the same external dimensions and ensuring that these magazines can be used on existing firearms. Beretta also produces "Sand Resistant" 15-round magazines to address issues with contractor-made magazines and 17-round magazines that come with the A1 models. Both magazines work in earlier 92 and M9 series pistol models.
Italian magazine manufacturer Mec-Gar now produces blued and nickel-plated magazines with an 18-round capacity that fit nicely in the 92 series. Mec-Gar also produces an extended blued 20-round magazine that protrude 3⁄4 inch (19 mm) below the frame. These chargers provide a larger capacity charger to users in unlimited countries.
The Vertec is a variant of the 92 series with a redesigned flat backstrap, removable sights, 1-slot accessory rail, extended magwell, and a 4.7-inch barrel.
The 90two is a 9mm/.40 version of the 92 series with a thicker slide and frame redesigned to accommodate an auxiliary rail, round stock, and .40 S&W weights. Other additional features include a recoil spring, internal recoil damper, user-changeable monogrips, and 17-round magazines.
Beretta 92fs: The Forgotten Service Pistol
The limited edition 92 FS Ctnial (500 units) commemorates the adoption of Beretta's earliest semi-automatic pistol, the Model 1915, by the Italian army. This Ctnial 92 is notable for its manual safety mechanism and frame-mounted single action. A Beretta medallion in each wooden grip plate shows the anniversary dates in Roman numerals, which are also engraved on both sides of the steel slide. The gun is packaged in a custom M2A1 ammo box with the Ctnial logo.
The M9A1 was adopted by the USMC in 2006. It adds a 1-slot Picatinny rail, more aggressive fore and aft belt controls, and an inclined magazine for easier reloading. The M9A1 pistols are sold with Physical Vapor Deposition (PVD) coated magazines, which are being developed to better withstand the conditions in the sandy environments of Iraq and Afghanistan.
The M9A3 (the M9A2 concept was never produced) was released in 2015 as a potential upgrade for the US Army in response to testing of the Modular Pistol System. The main updates to the M9A3 were a 3-slot Picatinny rail, a thinner vertical grip, removable grips that can be swapped between Vertec style and the "old" M9 style,
Fully removable tritium night sights and a universal slide that allows the gun to be converted from safe mode decocker to decocker only. The front of the tube is pre-threaded to make it easier to add a muffler.
Beretta 92fs Gold 15 Round Pistol
Beretta/Wilson Brigadier Combat 92G, a joint effort between Wilson Combat and Beretta. It features a heavy Brigadier Slide, stainless match barrel, single-function ambi-decock and sophisticated action.
These pistols differ from the standard Brigadier in that they have 1913 military standard picatinny rails, all steel controls (rather than polymer coated steel), decoy only (model G), barrel crowned with a 4.7-inch target, crimped steel guide, slim profile G-10 grip, round trigger guard, lighter shock spring used in the "D" model, Elite II hammer and their own unique serial number prescribed with "WC" among other features.
Elite LTT introduced Beretta in 2018 in collaboration with firearms instructor Ernest Langdon. The LTT uses a Vertec slide with serrated front serrations on a modified M9A1 frame and carries Langdon Tactical G10 grips. The gun features a G-model decocker, braided front sight, steel trigger and guide rod, improved springs, and a 4.7-inch stainless barrel with target crown, to name just a few of the salient features.
The 92x was introduced in 2019 as an update of the 92 series and the standardization of the Vertec platform. Similar to the M9A3, it features a 3-slot Picatinny rail, slim vertical grip, removable wraparound grips that are interchangeable between Vertec style and 'old' M9 style, fully removable sights (high visibility orange dot) and universal slide , making it possible to switch the gun from safe to open mode to open mode only. Unlike the M9A3, the barrel is not threaded. The 92x series is available in compact, curio and full size versions.
Beretta Model 92fs Inox \
The Performance 92x was introduced in 2019, alongside the 92x as a competition pistol. Similar to the 92x, it has a 3-slot Picatinny rail, slimmer vertical grip, removable grips that can be swapped between Vertec style sights and 'old' M9 dovetail style. However, the Performance 92x features a red fiber optic front sight, adjustable rear sight, front and rear sliders
Hickok45 beretta 92fs, customized beretta 92fs, beretta 92fs gold, beretta 92fs inox italian, italian made beretta 92fs, beretta 92fs holster, beretta shoulder holster 92fs, modified beretta 92fs, beretta 92fs extractor, beretta 92fs safety, safariland beretta 92fs, beretta 92fs parts
0 Comments